Texas Concrete Contractor License Requirements (2026)

Texas does not issue a general state business license or a statewide concrete contractor credential. Concrete contractors must identify the permits and licensing requirements set by the city or county where the work will occur, along with any separately regulated work included in the project. The statewide rule answers only the starting licensing question. Before signing a concrete contract, match the exact scope, project type, value, permits, and any separately regulated work to the authority identified in the sources below.

Local licensing in major Texas cities

Texas has no statewide concrete contractor license, so these cities and counties set their own rules. Each link opens the jurisdiction's official page; confirm the current requirement there before bidding.

Local licensing in major Texas cities: what each jurisdiction requires and its published fee
Jurisdiction	What it requires	Fee
Dallasdallascityhall.com	Dallas issues permits to install paving on city property — drive approaches, sidewalks, and curb and gutter — only to a bonded paving contractor.	Not published
San Antoniosa.gov	San Antonio issues a Sidewalk, Curb and Gutter License. Applicants provide government-issued photo identification and a $2,000 bond in the license holder’s and business’s name; registrations expire each December 31.	$60 annual license and registration fee
Fort Worthfortworthtexas.gov	Contractors must be licensed and bonded by Transportation and Public Works to perform construction in the city right-of-way, with a $25,000 Street and Storm Drain Contractors Bond; commercial work also requires $10 million in general liability coverage.	$500 annual license fee

Who Regulates Concrete Contractor Work in Texas?

Office of the Texas Governor — Business Permit Office is the main official reference this guide uses for concrete work in Texas. Use this official state or local authority to confirm the concrete route, scope, and current filing requirements for the project.

Official reference: gov.texas.gov

Texas State and Local Eligibility Rules

There is no single statewide application for this work, so this guide does not impose a uniform applicant-age, identification, or tax-number rule. Check the business, specialty-trade, and local authorities that govern the actual project. Use the current state or local application for identity and entity requirements.

State-level applicant screening

Use the current regulator application and disclosure requirements for the actual route.

Background-check requirements

No universal concrete-specific fingerprint requirement is stated in the reviewed source.

Experience and Scope Requirements in Texas

No statewide concrete-specific experience requirement was identified. Local licensing programs, specialty credentials, and project owners may still set their own qualifications.

Relevant records and local documents

Use the current application and any state or local supporting forms required for the selected route.

Is There a Texas Concrete Contractor Exam?

There is no single statewide trade examination for the local or scope-specific path described here. The applicable testing rule is: See the cited regulator for the selected concrete route

Examination fee: No statewide concrete-specific examination was identified.

Retake policy: Follow the current regulator instructions if an examination applies to the selected route.

Insurance, Bonds, and Project Requirements in Texas

No statewide contractor-license bond applies to the local or scope-specific path described here. A city, county, permit authority, public owner, or project contract may still require a bond, so confirm the actual project requirements before bidding.

General liability

Use the cited state or local route for any required bond or liability insurance; requirements vary by classification and project.

Workers' compensation

Meet applicable workers’ compensation requirements for the business and workforce.

Texas Concrete Contractor Fees and Compliance Costs

Texas charges no statewide licensing fee for concrete contractor work. Startup costs come from the local registrations, business filings, permits, insurance, and any specialty or federal certifications described in this guide, so they differ by city and by the work performed.

To budget for the applicable registration, permits, insurance, and project requirements, open the cost calculator preloaded for Texas concrete contractor.

Renewal and Ongoing Compliance in Texas

There is no single statewide license-renewal cycle for the Texas Concrete Contractor — Local Licensing Framework; renew each applicable local registration, business filing, permit-related credential, or specialty license on the schedule set by its issuing authority. There is no single statewide renewal fee for this path; local and scope-specific charges vary by authority. Local renewal rules vary.

Out-of-State Concrete Contractor Credentials in Texas

Texas has no single statewide credential for this path to transfer through NASCLA. An authority may consider an outside license, examination, or experience record only under its own current rules.

There is no separate concrete-specific reciprocity agreement; any reciprocity comes from the state route cited on this page.

Weighing more than one jurisdiction? The national hub compares published Concrete Contractor license requirements by state — exam, bond, fee, and experience thresholds side by side.

Step-by-Step Compliance Roadmap

Identify the governing route. Use the local building department and permit authority for the project location; Texas directs businesses to contact county and city government for local permitting requirements.
Confirm scope and project type. Match residential, commercial, public-right-of-way, and specialty work to the actual governing classification or local requirement.
Complete current filings. Use the cited regulator’s current application, bond, insurance, tax, and permit instructions.
Assemble the project-specific file. Keep the classification or registration record, insurance or bond evidence, contract scope, and the documents required by Texas's permitting authority together before applying for a permit or beginning work.
Keep state authority and project approval aligned. Do not let a broad contractor credential, registration, or specialty label substitute for the actual project permit, plan review, inspection, or separately licensed trade requirement.

Pre-Work Checklist

Before bidding or beginning work, confirm each item below with the authorities that govern the project location and scope:

Confirm the concrete scope and project type
Use the cited state or local route
Verify bond, insurance, tax, and permit requirements before bidding
Project scope, value, and work location matched to the actual state route
Permit, inspection, zoning, right-of-way, and separately regulated-trade requirements confirmed

Common Compliance Mistakes

The issues below are the most likely to create an unlicensed-work, registration, permit, or scope problem for Texas Concrete Contractor work, based on the official sources cited on this page.

Using another trade’s requirements for concrete work

Concrete work follows the state-specific route described here; requirements for masonry, paving, or other trades can differ.

Ignoring scope or local authority

Concrete classification and permitting requirements can change by project type and location.

Bidding outside the actual concrete scope

A classification, registration, or exemption must match the particular concrete scope and project facts; it is not blanket authority for unrelated or separately regulated work.

Official References and Preparation Materials

These references are cited in the Texas sources for this guide or commonly used to prepare for concrete work; CLR receives no compensation for listing them.

Office of the Texas Governor — Business Permit Office — Office of the Texas Governor — Business Permit Office. Use this official source to confirm the current concrete route and filing requirements.

Concrete Contractor Pay and Employment in Texas

The U.S. Bureau of Labor Statistics estimates that 26,430 cement masons and concrete finishers work in Texas, earning a median of $47,500 a year ($22.84 an hour). That is 17% below the national median of $57,020, ranking 44th of 51 jurisdictions BLS published. The lowest-paid 10% earn under $36,360 and the top 10% earn over $60,770. The trade is more concentrated in Texas's workforce than nationally (location quotient 1.42), so competition for jobs and for experienced hires tends to be higher.

Cement Masons and Concrete Finishers wages, Texas compared with the United States, May 2025
Measure	Texas	United States
Median annual wage	$47,500	$57,020
Median hourly wage	$22.84	$27.41
10th–90th percentile	$36,360–$60,770	$39,190–$85,480
Employment	26,430	206,170

Source: BLS Occupational Employment and Wage Statistics, May 2025, occupation 47-2051 (Cement Masons and Concrete Finishers). Figures cover wage and salary employees and exclude self-employed owners.

Frequently Asked Questions

Does Texas have a separate concrete contractor license?

What is the current state-level route?

Use the local building department and permit authority for the project location; Texas directs businesses to contact county and city government for local permitting requirements.

What testing, cost, or renewal rule applies?

No statewide concrete-specific examination was identified. Local licensing and permit costs vary. Local renewal rules vary.

Does the statewide route replace local concrete permits or approvals?

No. The statewide route described here is separate from the permit, inspection, zoning, right-of-way, and project-specific contractor requirements set by Texas's permitting authority.

Do any Texas cities license concrete contractors?

Yes. Dallas, San Antonio and Fort Worth each set a local license, registration, or bonding requirement that covers concrete work. Other cities and counties set their own rules, so check the jurisdiction where the work is located.

Primary Sources

Regulatory requirements on this page are drawn from the official board, statute, and exam-provider materials listed below.

Verified 2026-09-08 · Next scheduled review 2026-12-07

Report a correction to this guide

Corrections and updates

No factual corrections have been recorded for this guide.

Layout changes shared by every guide are listed in the template change log; they do not change source-check dates.

Concrete Contractor Licensing in Neighboring States

Contractors working near a state line, or weighing where to qualify first, should compare Texas's requirements against the bordering jurisdictions before bidding or beginning work:

Arkansas Concrete Contractor License Requirements — Arkansas Concrete Contractor — Commercial / Residential Concrete Classification Path
Louisiana Concrete Contractor License Requirements — Louisiana Concrete Contractor — Concrete Construction / Related LSLBC Classifications
New Mexico Concrete Contractor License Requirements — New Mexico GS-4 Concrete, Cement, Walkways and Driveways — CID
Oklahoma Concrete Contractor License Requirements — Oklahoma Concrete Contractor — Local Licensing Framework

Local requirements and practical guides

Houston General Contractors: Licensing, Trade Registration, and Permits
Understand Houston’s general-contractor rules, separate electrical, mechanical and plumbing registrations, and the building-permit application route.
Dallas Contractor Registration: DallasNow, Business Records, and Permits
Register a general contractor in DallasNow, distinguish registration from permits and housing-program approval, and understand the city’s fee guidance.
Austin Contractor Registration: AB+C Accounts, Authorization, and Activation
Prepare Austin’s AB+C account and authorization, register a general or trade contractor, activate approved permits, and keep registration details current.

More guides for Texas contractors

Other Texas Trade Licenses

CLR also publishes these Texas licensing guides for other trades: