Florida Concrete Contractor License Requirements (2026)
By Gabriel Giner, Editor · Source checked 2026-09-08
Florida does not provide a general statewide concrete-contractor classification for ordinary flatwork or foundations. The state does list a narrow Certified Structural Pre-stressed, Precast Concrete Work specialty; its scope should not be used as a substitute for local authority over other concrete work. The statewide rule answers only the starting licensing question. Before signing a concrete contract, match the exact scope, project type, value, permits, and any separately regulated work to the authority identified in the sources below.
Regulatory Body
This license is issued and enforced by Florida DBPR — Construction Industry licenses pursuant to undefined. Use this official state or local authority to confirm the concrete route, scope, and current filing requirements for the project.
- Official portal: https://www2.myfloridalicense.com/construction-industry/
Eligibility Requirements
This guide does not establish a minimum applicant age; confirm any age requirement with the issuing authority. Check the current application for identification and tax-number requirements. Use the current state or local application for identity and entity requirements.
Good moral character
Use the current regulator application and disclosure requirements for the actual route.
Background investigation
No universal concrete-specific fingerprint requirement is stated in the reviewed source.
Experience and Education
Eligibility here is not measured in years of experience but by The current certified Structural Pre-stressed, Precast Concrete Work application requires four years of worker or foreman experience, including at least one year as a foreman., per the cited materials.
Accepted proof of experience or eligibility
- Use the current application and any state or local supporting forms required for the selected route.
Exam Requirements
The cited state materials do not require a written state trade examination for this credential. The controlling process is: See the cited regulator for the selected concrete route
Examination fee: Use DBPR’s current specialty-contractor application and examination information for the narrow certified specialty; no statewide ordinary-concrete exam was identified.
Retake policy: Follow the current regulator instructions if an examination applies to the selected route.
Insurance and Bonds
The cited state source set does not require a contractor license surety bond for this credential. Contractors should still confirm project-specific bond, permit-bond, or public-works bond requirements before bidding.
General liability
Use the cited state or local route for any required bond or liability insurance; requirements vary by classification and project.
Workers' compensation
Meet applicable workers’ compensation requirements for the business and workforce.
Fee Schedule
| Fee | Amount |
|---|---|
| Application (non-refundable) | No separate state fee |
| Initial license | No separate state fee |
| Renewal cycle varies by jurisdiction | No separate state fee |
To turn these board fees into a realistic year-one budget — bond premium, liability insurance, and exam prep included — open the cost calculator preloaded for Florida concrete contractor.
Renewal and Continuing Education
The Florida Concrete Work — No General Statewide Concrete Classification does not have a single statewide renewal cycle; follow the issuing board or local jurisdiction schedule. The cited materials name no distinct statewide fee for renewal. Use the current DBPR cycle and continuing-education requirements only for the certified specialty actually held.
Reciprocity
Florida does not accept the NASCLA Accredited Examination for this classification.
| Reciprocal State | Accepted Exam | Conditions |
|---|---|---|
| No formal bilateral reciprocity agreements identified. | ||
No concrete-specific reciprocity claim is made unless the cited state route expressly provides one.
Weighing more than one jurisdiction? The national hub compares Concrete Contractor license requirements in every state — exam, bond, fee, and experience thresholds side by side.
Concrete Contractor Licensing in Neighboring States
Contractors working near a state line, or weighing where to qualify first, should compare Florida's requirements against the bordering jurisdictions before committing to an application:
- Alabama Concrete Contractor License Requirements — Alabama Concrete Contractor — No Standalone State Concrete License
- Georgia Concrete Contractor License Requirements — Georgia Concrete Contractor — No Standalone State Concrete License
Step-by-Step Application Roadmap
- Identify the governing route. Use the certified Structural Pre-stressed, Precast Concrete Work specialty only when its actual scope applies; otherwise confirm the local licensing path and any broader contractor authority.
- Confirm scope and project type. Match residential, commercial, public-right-of-way, and specialty work to the actual governing classification or local requirement.
- Complete current filings. Use the cited regulator’s current application, bond, insurance, tax, and permit instructions.
- Assemble the project-specific file. Keep the classification or registration record, insurance or bond evidence, contract scope, and the documents required by Florida's permitting authority together before applying for a permit or beginning work.
- Keep state authority and project approval aligned. Do not let a broad contractor credential, registration, or specialty label substitute for the actual project permit, plan review, inspection, or separately licensed trade requirement.
Application Checklist
These are the pieces to lock down before filing with Florida DBPR — Construction Industry licenses:
Progress is saved in this browser, so you can return to this checklist while your application is in flight.
Common Filing Mistakes
Working from the cited board instructions, here are the snags most likely to trip up a Florida Concrete Contractor filing.
Using another trade’s requirements for concrete work
This guide uses the state-specific concrete route rather than inherited trade requirements.
Ignoring scope or local authority
Concrete classification and permitting requirements can change by project type and location.
Bidding outside the actual concrete scope
A classification, registration, or exemption must match the particular concrete scope and project facts; it is not blanket authority for unrelated or separately regulated work.
Study and Reference Materials
The references below are either cited by the board, used during the application, or standard preparation for the trade. They are listed purely for convenience — CLR earns no commission on any of them.
- Florida DBPR — Construction Industry licenses — Florida DBPR — Construction Industry licenses. Use this official source to confirm the current concrete route and filing requirements.
- Florida DBPR — Structural Pre-stressed, Precast Concrete Work application — Florida DBPR — Structural Pre-stressed, Precast Concrete Work application. Use this official source to confirm the current concrete route and filing requirements.
Other Florida Trade Licenses
If the Concrete Contractor license is not the right fit, the following published Florida trade guides are also covered by CLR:
- Florida General Contractor License Requirements
- Florida Electrician License Requirements
- Florida Plumber License Requirements
- Florida HVAC Technician License Requirements
- Florida Roofing Contractor License Requirements
- Florida Painting Contractor License Requirements
- Florida Landscaping Contractor License Requirements
- Florida Solar Installer License Requirements
- Florida Low-Voltage Technician License Requirements
- Florida Fire Sprinkler Contractor License Requirements
- Florida Home Inspector License Requirements
- Florida Pool Contractor License Requirements
- Florida Handyman License Requirements
- Florida Pest Control License Requirements
Frequently Asked Questions
Does Florida have a separate concrete contractor license?
Florida does not provide a general statewide concrete-contractor classification for ordinary flatwork or foundations. The state does list a narrow Certified Structural Pre-stressed, Precast Concrete Work specialty; its scope should not be used as a substitute for local authority over other concrete work.
What is the current state-level route?
Use the certified Structural Pre-stressed, Precast Concrete Work specialty only when its actual scope applies; otherwise confirm the local licensing path and any broader contractor authority.
What testing, cost, or renewal rule applies?
Use DBPR’s current specialty-contractor application and examination information for the narrow certified specialty; no statewide ordinary-concrete exam was identified. Use the current DBPR fee schedule for the certified specialty. Local requirements can apply to work outside that specialty. Use the current DBPR cycle and continuing-education requirements only for the certified specialty actually held.
Does the statewide route replace local concrete permits or approvals?
No. The statewide route described here is separate from the permit, inspection, zoning, right-of-way, and project-specific contractor requirements set by Florida's permitting authority.
Primary Sources
Regulatory requirements on this page are drawn from the official board, statute, and exam-provider materials listed below.
- Florida DBPR — Construction Industry licenses
- Florida DBPR — Structural Pre-stressed, Precast Concrete Work application
Verified 2026-09-08 · Next scheduled review 2026-12-07
Report a correction to this guide
Corrections and presentation updates
- : Shared template updated to distinguish unspecified eligibility requirements, retain cost qualifications, and use consistent headings. Source-check dates are unchanged by presentation updates.