Skip to content
CLR

Wyoming Masonry License Requirements (2026)

Gabriel Giner

By Gabriel Giner, Editor · Source checked 2026-09-04

Wyoming’s current state materials do not identify a statewide masonry-contractor credential. Instead, a city, county, town, or other local government may license contractors for work in its jurisdiction. Confirm the project authority’s license, qualified-supervisor, insurance, permit, and inspection rules before contracting. Construction is listed as extrahazardous employment under Wyoming workers’ compensation law, so address Department of Workforce Services registration and coverage before work begins.

Regulatory Body

Authority over this credential rests with Wyoming local contractor licensing jurisdictions (Local AHJ), which issues and polices it under Wyo. Stat. § 16-6-1101 (local contractor-license reciprocity); Wyo. Stat. § 27-14-108 (construction as extrahazardous employment).. Local governments may issue contractor licenses and administer local permits. Cheyenne is one current example: its Building Permitting & Licensing Division administers construction permits and contractor licensing within the city. The Department of Workforce Services determines workers’ compensation registration and coverage.

Eligibility Requirements

This guide does not establish a minimum applicant age; confirm any age requirement with the issuing authority. Check the current application for identification and tax-number requirements. No statewide masonry-license application was identified. The project jurisdiction sets any local licensing requirements; ask it how an out-of-state business or contractor should apply.

Good moral character

No statewide masonry-licensing character standard was identified. Local authorities may set application and good-standing requirements.

Background investigation

No statewide masonry-license background-check requirement was identified. Verify any local requirement directly with the project jurisdiction.

Experience and Education

The sources cited here stop short of naming a year requirement; the operative standard is No statewide masonry experience requirement was identified. A local licensing authority may establish qualifications for its license or qualified supervisor..

Education substitution

No statewide substitution rule was identified; verify local qualification standards before applying.

Exam Requirements

The cited sources impose no written trade exam at the state level here. The path to the credential runs through: No statewide masonry exam was identified. A local authority may set its own qualification or examination rules.

Examination fee: $0 statewide masonry examination fee identified; local examination charges, if any, are set by the project jurisdiction.

Retake policy: No statewide masonry examination retake rule was identified. Confirm the local rule if an exam is required.

Insurance and Bonds

No statewide contractor license surety bond is required for this credential in the cited sources. Project-specific, permit, or public-works bonds may still apply, so confirm bonding before bidding a given job.

General liability

Wyoming does not publish a single statewide general-liability minimum for masonry contractors in the sources reviewed. A local licensing authority or project contract may require proof of insurance.

Workers' compensation

Construction (NAICS sector 23) is extrahazardous employment under Wyo. Stat. § 27-14-108. DWS says employers subject to the Workers’ Compensation Act must apply for coverage and receive a statement of coverage before beginning work; all employers register so DWS can determine the coverage obligation. Owners and officers are not automatically covered and may elect coverage under DWS rules.

Additional financial requirements

No statewide masonry-contractor financial-statement requirement was identified. Verify financial-assurance requirements with the project jurisdiction.

Fee Schedule

FeeAmount
Application (non-refundable)No separate state fee
Initial licenseNo separate state fee
Renewal cycle varies by jurisdictionNo separate state fee

To turn these board fees into a realistic year-one budget — bond premium, liability insurance, and exam prep included — open the cost calculator preloaded for Wyoming masonry.

Renewal and Continuing Education

There is no uniform statewide renewal interval for the Wyoming Masonry Contractor — Local Licensing and Permit Guide — the issuing board or local jurisdiction sets the schedule. A standalone statewide renewal fee is not published in the cited record. Wyoming does not publish a single statewide masonry-license renewal cycle or fee. Follow the local authority’s current notice and fee schedule.

Continuing education: No statewide masonry continuing-education rule was identified. Verify any local renewal or education requirement with the issuing jurisdiction.

Downloadable Asset

2026 Wyoming Masonry License Roadmap (PDF) — a printable step-by-step checklist for the application process.

Download the PDF roadmap →

Reciprocity

Wyoming grants no NASCLA reciprocity for this classification.

Reciprocal StateAccepted ExamConditions
No formal bilateral reciprocity agreements identified.

Wyo. Stat. § 16-6-1101 requires a county, city, town, or other government entity that issues contractor licenses to recognize another Wyoming local license when the statutory conditions are met. The license must be active and in good standing; the accepting jurisdiction may require financial assurance, and the statute requires proof of the appropriate ICC examination or equivalent. This is not blanket permission to work without contacting the accepting jurisdiction.

Weighing more than one jurisdiction? The national hub compares Masonry license requirements in every state — exam, bond, fee, and experience thresholds side by side.

Masonry Licensing in Neighboring States

Contractors working near a state line, or weighing where to qualify first, should compare Wyoming's requirements against the bordering jurisdictions before committing to an application:

Step-by-Step Application Roadmap

  1. Identify the project jurisdiction. Contact the city, county, town, or other local government where the masonry work will occur and ask whether its contractor license and building permit apply to the project.
  2. Confirm the local classification and qualifications. Request the authority’s current application, qualified-supervisor, experience, examination, insurance, and fee requirements. Do not assume another city’s class applies.
  3. Register with DWS before work begins. Use DWS’s joint business-registration process so the Department can determine workers’ compensation and unemployment-insurance obligations. Employers subject to the Workers’ Compensation Act need a statement of coverage before work starts.
  4. Prepare local insurance and financial-assurance documents. Provide only the liability, bond, workers’ compensation, or other documents the project authority or contract actually requires.
  5. Apply for the local license or recognition. If you already hold an active Wyoming local contractor license, ask the accepting jurisdiction how it implements § 16-6-1101 reciprocity and what proof it needs.
  6. Obtain permits before starting. Submit the project through the local building-permit process and follow the authority’s inspection instructions.
  7. Maintain local and DWS compliance. Track the jurisdiction’s renewal date and keep DWS reporting and coverage current for the business activity and workforce.

Application Checklist

Have each of the following squared away before the packet goes to Local AHJ:

Common Filing Mistakes

These are the recurring mistakes that most often delay or reject a Wyoming Masonry application, based on the official instructions cited here.

Treating one city’s requirements as statewide

Wyoming’s local contractor-license framework is jurisdiction-specific. Confirm the rules where the project is located.

Assuming reciprocity is automatic

Section 16-6-1101 has conditions. Obtain the accepting jurisdiction’s instructions and provide the documentation it requires.

Starting construction before DWS coverage is resolved

Construction is listed as extrahazardous employment. Complete DWS registration early so the Department can determine the business’s obligation before work begins.

Using estimates for local fees or insurance limits

Do not rely on generalized dollar amounts. Request the current fee schedule and insurance or financial-assurance requirements from the project authority.

Skipping the local permit process

A contractor license or reciprocal recognition does not replace the project’s building permit and inspection requirements.

Study and Reference Materials

These materials are drawn from the regulator's own citations and the references applicants commonly use to prepare. CLR receives no compensation for listing them.

  • Wyo. Stat. § 16-6-1101 — Contractor licenses; reciprocity; requirementsWyoming Legislature. Sets conditions for recognition of qualifying contractor licenses issued by Wyoming local governments.
  • Wyo. Stat. § 27-14-108 — Extrahazardous employmentWyoming Legislature. Lists construction as extrahazardous employment for workers’ compensation purposes.
  • DWS New Employers guidanceWyoming Department of Workforce Services. Explains the joint business-registration process and statement-of-coverage requirement for employers subject to the Act.
  • Local building and contractor-licensing materialsProject jurisdiction. Use the current application, classification, permit, and inspection materials issued by the local authority.

Other Wyoming Trade Licenses

CLR maintains guides for additional Wyoming trades; the published ones are listed here:

Frequently Asked Questions

Does Wyoming issue a statewide masonry contractor license?

The current state sources reviewed do not identify a statewide masonry-contractor credential. Local governments may issue contractor licenses and administer permits for work in their jurisdictions.

Do I need a local contractor license?

Ask the city, county, town, or other authority where the project is located. For example, Cheyenne administers contractor licensing and construction permits within its city limits; other jurisdictions may use different rules.

Can a Wyoming local contractor license transfer to another Wyoming jurisdiction?

Wyoming’s local-license reciprocity statute can require recognition when its conditions are met, including active good standing and appropriate exam proof. Contact the accepting jurisdiction before relying on the statute.

Is workers’ compensation relevant to masonry work?

Yes. Construction is listed as extrahazardous employment. DWS determines coverage through its registration process, and employers subject to the Act need a statement of coverage before work begins.

Is there a statewide masonry exam or renewal cycle?

No statewide masonry exam, fee, or renewal cycle was identified in the sources reviewed. Local rules control if the project jurisdiction licenses masonry contractors.

Primary Sources

Regulatory requirements on this page are drawn from the official board, statute, and exam-provider materials listed below.

  1. Wyoming Legislature — Wyo. Stat. § 16-6-1101, contractor-license reciprocity
  2. Wyoming Legislature — Wyo. Stat. § 27-14-108, extrahazardous employment
  3. Wyoming Department of Workforce Services — New Employers
  4. City of Cheyenne — Building Permitting & Licensing
  5. City of Cheyenne — Contractor Licensing Board

Verified 2026-09-04  · Next scheduled review 2026-12-03

Report a correction to this guide

Corrections and presentation updates
  • : Shared template updated to distinguish unspecified eligibility requirements, retain cost qualifications, and use consistent headings. Source-check dates are unchanged by presentation updates.