Wyoming General Contractor License Requirements (2026)

Wyoming does not issue one statewide general-contractor credential for ordinary building work. Contractor licensing, registration, and permits are administered by the project authority having jurisdiction. Requirements can therefore differ by city or county and should be verified for the project address before bidding or starting work. Cheyenne is one documented local program: every licensed company needs at least one qualified supervisor, and applicants may need experience documentation, an ICC examination, a board appearance, workers’ compensation registration, and other documents depending on license class. Jackson, Sheridan, and Cody also license general and residential contractors, each with its own exam, insurance, and bond rules. A local contractor approval does not replace project permits or establish authority in another jurisdiction.

Local licensing in major Wyoming cities

Wyoming has no statewide general contractor license, so these cities and counties set their own rules. Each link opens the jurisdiction's official page; confirm the current requirement there before bidding.

Local licensing in major Wyoming cities: what each jurisdiction requires and its published fee
Jurisdiction	What it requires	Fee
City of Cheyenne (Building Permitting & Licensing)cheyennecity.org	Cheyenne licenses contractors in pairs: a company license plus an Individual Qualified Supervisor license. Class A (any structure), Class B (residential up to three stories and small commercial), and Class R (detached single-family) licenses require an approved exam, documented experience, and $1,000,000/$2,000,000 liability insurance.	$50.00 application fee; $600.00 initial license (Class A) or $400.00 (Class B or R)
Town of Jackson (Planning & Building)jacksonwy.gov	Contractors working in the Town of Jackson need a town contractor license, issued after the master of record obtains a Certificate of Qualification by ICC exam or reciprocity. Classes include General Contractor (Class A), Building Contractor (Class B), Building Contractor Restricted (Class BR), and Residential Contractor (Class C).	Not published
City of Sheridan (Building Division)sheridanwy.gov	Commercial and Residential Contractor licenses require an ICC exam, four years as a journeyman carpenter, two years of project verification, $1,000,000 liability insurance, and a $25,000 license and permit bond.	$200.00 to obtain and $200.00 annually to renew
City of Cody (City Contractors Board)codywy.gov	Contractors working within Cody city limits must obtain a contractor's license from the City Contractors Board; General Contractor and General Contractor-IRC (residential) classes are based on ICC National Standard exams, and a certificate of insurance naming the city is required.	Not published

Who Regulates General Contractor Work in Wyoming?

No single state agency licenses general contracting work in Wyoming, so this guide relies on the local and state sources cited below. Local ordinance and licensing regulations govern general-contractor licensing and permits in Wyoming. Wyoming has no statewide general-contractor licensing board. The city, county, or other project authority administers any contractor credential, registration, permit, and inspection requirements.

Official reference: cheyennecity.org

Wyoming State and Local Eligibility Rules

There is no single statewide application for this work, so this guide does not impose a uniform applicant-age, identification, or tax-number rule. Check the business, specialty-trade, and local authorities that govern the actual project. There is no statewide general-contractor license application or residency rule. The project jurisdiction sets any local eligibility and business-registration conditions.

State-level applicant screening

No statewide general-contractor character standard applies. Use the actual local application and board requirements.

Background-check requirements

No statewide general-contractor background-check program applies. Local requirements vary by jurisdiction and license class.

Experience and Scope Requirements in Wyoming

Wyoming has no statewide general-contractor experience threshold. A local program can require a qualified supervisor, detailed hands-on experience, or testing for a particular license class. Local licensing programs, specialty credentials, and project owners may still set their own qualifications.

Relevant records and local documents

Current contractor-license and permit instructions from the project jurisdiction
Local qualified-supervisor, experience, insurance, workers’ compensation, and examination documents when required

Education and scope boundaries

No statewide general-contractor education substitution exists; a local program controls its own qualifications.

Is There a Wyoming General Contractor Exam?

There is no single statewide trade examination for the local or scope-specific path described here. The applicable testing rule is: No statewide general-contractor examination. Local programs set their own examinations.

Examination fee: No statewide examination fee. Use the project jurisdiction’s current fee schedule.

Retake policy: No statewide rule exists. In Cheyenne, tested applicants whose license application is denied must submit a new application and pay a new $50 application fee.

Insurance, Bonds, and Project Requirements in Wyoming

No statewide contractor-license bond applies to the local or scope-specific path described here. A city, county, permit authority, public owner, or project contract may still require a bond, so confirm the actual project requirements before bidding.

General liability

Wyoming has no statewide general-contractor liability-insurance minimum. The local authority, owner, lender, insurer, or contract may require coverage; obtain the actual project requirement before applying or contracting.

Workers' compensation

Construction is an extra-hazardous employment sector under Wyo. Stat. § 27-14-108. The Department of Workforce Services says businesses in an extra-hazardous industry must obtain DWS coverage before work begins; every employer must register so DWS can determine coverage. Cheyenne also requires contractor applicants to provide Workers’ Compensation registration proof.

Financial or filing requirements

No statewide general-contractor bond or financial-statement requirement exists. Any bond is a local or project-specific condition.

Wyoming General Contractor Fees and Compliance Costs

Wyoming charges no statewide licensing fee for general contractor work. Startup costs come from the local registrations, business filings, permits, insurance, and any specialty or federal certifications described in this guide, so they differ by city and by the work performed.

To budget for the applicable registration, permits, insurance, and project requirements, open the cost calculator preloaded for Wyoming general contractor.

Renewal and Ongoing Compliance in Wyoming

There is no single statewide license-renewal cycle for the Wyoming General Contractor — Local Licensing and Permits; renew each applicable local registration, business filing, permit-related credential, or specialty license on the schedule set by its issuing authority. There is no single statewide renewal fee for this path; local and scope-specific charges vary by authority. There is no statewide contractor license to renew. Follow the actual local license, registration, and business-renewal requirements.

Continuing education: No statewide general-contractor continuing-education requirement exists.

Out-of-State General Contractor Credentials in Wyoming

Wyoming has no single statewide credential for this path to transfer through NASCLA. An authority may consider an outside license, examination, or experience record only under its own current rules.

There is no statewide general-contractor credential for Wyoming to reciprocate. Ask the project authority whether it recognizes outside documentation.

Weighing more than one jurisdiction? The national hub compares published General Contractor license requirements by state — exam, bond, fee, and experience thresholds side by side.

Step-by-Step Compliance Roadmap

Identify the project authority. Start with the city, county, or other authority for the project address. It controls any general-contractor license, registration, permit, and inspection path.
Confirm the local contractor class. Ask whether the actual scope needs a company license, qualified supervisor, experience verification, ICC examination, board review, local business registration, or only permits.
Set up required workforce coverage. Register with Wyoming DWS so it can determine workers’ compensation coverage. Construction is listed as extra-hazardous, and Cheyenne requests Workers’ Compensation registration proof from contractors.
Prepare local application documents. Use the project jurisdiction’s current insurance, experience, supervisor, examination, fee, and other application instructions. Do not copy another city’s requirements.
Complete board or examination steps when required. Cheyenne states that applicants required to test and appear before its board must submit company and qualified-supervisor applications and detailed hands-on experience before the monthly meeting deadline.
Obtain local contractor approval. Apply with the local authority and retain the approval for the correct company and license class.
Pull project permits and schedule inspections. A contractor approval is not the permit. Complete the separate project permit, inspection, and code-compliance process required by the authority having jurisdiction.

Pre-Work Checklist

Before bidding or beginning work, confirm each item below with the authorities that govern the project location and scope:

Project authority’s current contractor-license, registration, and permit instructions
Local qualified-supervisor and experience documents when required
Current local insurance or bond documentation when required
Wyoming DWS registration and any required workers’ compensation coverage
Local application, fee, board, and examination steps when required
Project-specific building permits and inspection approvals

Common Compliance Mistakes

The issues below are the most likely to create an unlicensed-work, registration, permit, or scope problem for Wyoming General Contractor work, based on the official sources cited on this page.

Searching for a statewide general-contractor credential

Wyoming does not issue one. Begin with the project authority and do not make an application based on another city’s program.

Treating local approval as a permit

Contractor registration or licensing does not replace project permits, inspections, or code compliance.

Skipping DWS registration

DWS says all employers must register so it can determine workers’ compensation coverage. Construction is listed as extra-hazardous employment.

Ignoring the local qualified-supervisor rule

In Cheyenne, each licensed company must have at least one qualified supervisor; other jurisdictions can impose different requirements.

Official References and Preparation Materials

These references are cited in the Wyoming sources for this guide or commonly used to prepare for general contracting work; CLR receives no compensation for listing them.

Contractor License Applications — City of Cheyenne. Official local example for company/qualified-supervisor, workers’ compensation, experience, testing, and board requirements.
Workers’ Compensation — Employers — Wyoming Department of Workforce Services. Official coverage and registration guidance for extra-hazardous employment.

General Contractor Pay and Employment in Wyoming

The U.S. Bureau of Labor Statistics estimates that construction managers work in Wyoming, earning a median of $92,320 a year ($44.39 an hour). That is 20% below the national median of $114,990, ranking 50th of 51 jurisdictions BLS published. The lowest-paid 10% earn under $62,480 and the top 10% earn over $160,480.

Construction Managers wages, Wyoming compared with the United States, May 2025
Measure	Wyoming	United States
Median annual wage	$92,320	$114,990
Median hourly wage	$44.39	$55.28
10th–90th percentile	$62,480–$160,480	$69,690–$189,440
Employment	—	380,360

Source: BLS Occupational Employment and Wage Statistics, May 2025, occupation 11-9021 (Construction Managers). Figures cover wage and salary employees and exclude self-employed owners. BLS has no "general contractor" occupation; construction managers plan, coordinate, and supervise building projects and are the closest match.

Frequently Asked Questions

Does Wyoming require a statewide general contractor license?

No. Wyoming does not issue one statewide general-contractor credential for ordinary construction. Check the project city, county, or other authority for local licensing, registration, and permit requirements.

Does a Cheyenne contractor need a qualified supervisor?

Yes. Cheyenne’s contractor-application page says every licensed company must have at least one qualified supervisor. The exact experience and examination path depends on the local license class.

Does a Wyoming contractor need workers’ compensation?

Construction is an extra-hazardous employment sector in Wyoming. DWS says extra-hazardous businesses need coverage before work begins and that employers must register so DWS can determine coverage.

Does a local contractor license replace building permits?

No. Local licensing or registration is separate from the project permit and inspection process.

Can a contractor use one city’s approval statewide?

Do not assume that. Wyoming has no statewide general-contractor credential, so verify the project authority’s current rules for every location.

Primary Sources

Regulatory requirements on this page are drawn from the official board, statute, and exam-provider materials listed below.

Verified 2026-09-04 · Next scheduled review 2026-12-03

Report a correction to this guide

Corrections and updates

No factual corrections have been recorded for this guide.

Layout changes shared by every guide are listed in the template change log; they do not change source-check dates.

General Contractor Licensing in Neighboring States

Contractors working near a state line, or weighing where to qualify first, should compare Wyoming's requirements against the bordering jurisdictions before bidding or beginning work:

Colorado General Contractor License Requirements — Colorado General Contractor Requirements — Local Jurisdictions
Idaho General Contractor License Requirements — Idaho Contractor Registration and Public Works Contractor License
Montana General Contractor License Requirements — Montana Construction Contractor License
Nebraska General Contractor License Requirements — Nebraska Contractor Registration
South Dakota General Contractor License Requirements — South Dakota Contractor's Excise Tax License (no state contractor license)
Utah General Contractor License Requirements — Utah General Contractor — B100 or R100

More guides for Wyoming contractors

Other Wyoming Trade Licenses

CLR also publishes these Wyoming licensing guides for other trades: