Oregon Concrete Contractor License Requirements (2026)
By Gabriel Giner, Editor · Source checked 2026-09-08
Oregon concrete contractors use the statewide Construction Contractors Board license, not a concrete-only credential. The contractor must carry the endorsement or endorsements that fit the structures on which it will work. The statewide rule answers only the starting licensing question. Before signing a concrete contract, match the exact scope, project type, value, permits, and any separately regulated work to the authority identified in the sources below.
Regulatory Body
Licensing for this trade is governed by Oregon CCB — license, endorsements, bonds, and fees, the agency that issues and regulates the credential under undefined. Use this official state or local authority to confirm the concrete route, scope, and current filing requirements for the project.
- Official portal: https://www.oregon.gov/ccb/pages/ccb%20license.aspx
Eligibility Requirements
This guide does not establish a minimum applicant age; confirm any age requirement with the issuing authority. Check the current application for identification and tax-number requirements. Use the current state or local application for identity and entity requirements.
Good moral character
Use the current regulator application and disclosure requirements for the actual route.
Background investigation
No universal concrete-specific fingerprint requirement is stated in the reviewed source.
Experience and Education
The sources cited here stop short of naming a year requirement; the operative standard is Use current CCB pre-license training and examination rules for the selected endorsement; no concrete-specific experience rule was identified..
Accepted proof of experience or eligibility
- Use the current application and any state or local supporting forms required for the selected route.
Exam Requirements
No written state trade examination is mandated for this credential in the cited materials. Instead, the operative process is: See the cited regulator for the selected concrete route
Examination fee: The CCB license examination fee is $60; verify current training and examination eligibility with CCB.
Retake policy: Follow the current regulator instructions if an examination applies to the selected route.
Insurance and Bonds
No statewide contractor license surety bond is required for this credential in the cited sources. Project-specific, permit, or public-works bonds may still apply, so confirm bonding before bidding a given job.
General liability
Use the cited state or local route for any required bond or liability insurance; requirements vary by classification and project.
Workers' compensation
Meet applicable workers’ compensation requirements for the business and workforce.
Fee Schedule
| Fee | Amount |
|---|---|
| Application (non-refundable) | No separate state fee |
| Initial license | No separate state fee |
| Renewal cycle varies by jurisdiction | No separate state fee |
To turn these board fees into a realistic year-one budget — bond premium, liability insurance, and exam prep included — open the cost calculator preloaded for Oregon concrete contractor.
Renewal and Continuing Education
No one statewide renewal cycle governs the Oregon Construction Contractor License — No Separate Concrete Classification; the controlling schedule is the issuing board's or the local jurisdiction's. No separate statewide renewal fee is listed in the cited sources. CCB license renewal is every two years; a lapse of more than 24 months requires training and testing again.
Reciprocity
For this classification, Oregon does not recognize the NASCLA Accredited Examination.
| Reciprocal State | Accepted Exam | Conditions |
|---|---|---|
| No formal bilateral reciprocity agreements identified. | ||
No concrete-specific reciprocity claim is made unless the cited state route expressly provides one.
Weighing more than one jurisdiction? The national hub compares Concrete Contractor license requirements in every state — exam, bond, fee, and experience thresholds side by side.
Concrete Contractor Licensing in Neighboring States
Contractors working near a state line, or weighing where to qualify first, should compare Oregon's requirements against the bordering jurisdictions before committing to an application:
- California Concrete Contractor License Requirements — California Class C-8 — Concrete Contractor
- Idaho Concrete Contractor License Requirements — Idaho Concrete Contractor Registration — No Separate Concrete License
- Nevada Concrete Contractor License Requirements — Nevada C-5 Concrete Contracting License
- Washington Concrete Contractor License Requirements — Washington Concrete Specialty Contractor Registration
Step-by-Step Application Roadmap
- Identify the governing route. Choose the correct residential, commercial, or dual CCB endorsement; a contractor performing both residential and large commercial work needs both endorsements.
- Confirm scope and project type. Match residential, commercial, public-right-of-way, and specialty work to the actual governing classification or local requirement.
- Complete current filings. Use the cited regulator’s current application, bond, insurance, tax, and permit instructions.
- Assemble the project-specific file. Keep the classification or registration record, insurance or bond evidence, contract scope, and the documents required by Oregon's permitting authority together before applying for a permit or beginning work.
- Keep state authority and project approval aligned. Do not let a broad contractor credential, registration, or specialty label substitute for the actual project permit, plan review, inspection, or separately licensed trade requirement.
Application Checklist
Before submitting to Oregon CCB — license, endorsements, bonds, and fees, the applicant should have each of the following ready:
Progress is saved in this browser, so you can return to this checklist while your application is in flight.
Common Filing Mistakes
These are the recurring mistakes that most often delay or reject a Oregon Concrete Contractor application, based on the official instructions cited here.
Using another trade’s requirements for concrete work
This guide uses the state-specific concrete route rather than inherited trade requirements.
Ignoring scope or local authority
Concrete classification and permitting requirements can change by project type and location.
Bidding outside the actual concrete scope
A classification, registration, or exemption must match the particular concrete scope and project facts; it is not blanket authority for unrelated or separately regulated work.
Study and Reference Materials
The list below collects the board's cited references and the materials applicants typically study from. CLR is not paid to recommend any of them.
- Oregon CCB — license, endorsements, bonds, and fees — Oregon CCB — license, endorsements, bonds, and fees. Use this official source to confirm the current concrete route and filing requirements.
Other Oregon Trade Licenses
For a different Oregon credential, see these companion guides published by CLR:
- Oregon General Contractor License Requirements
- Oregon Electrician License Requirements
- Oregon Plumber License Requirements
- Oregon HVAC Technician License Requirements
- Oregon Roofing Contractor License Requirements
- Oregon Painting Contractor License Requirements
- Oregon Landscaping Contractor License Requirements
- Oregon Masonry Contractor License Requirements
- Oregon Carpentry Contractor License Requirements
- Oregon Solar Installer License Requirements
- Oregon Low-Voltage Technician License Requirements
- Oregon Fire Sprinkler Contractor License Requirements
- Oregon Home Inspector License Requirements
- Oregon Pool Contractor License Requirements
- Oregon Handyman License Requirements
- Oregon Pest Control License Requirements
Frequently Asked Questions
Does Oregon have a separate concrete contractor license?
Oregon concrete contractors use the statewide Construction Contractors Board license, not a concrete-only credential. The contractor must carry the endorsement or endorsements that fit the structures on which it will work.
What is the current state-level route?
Choose the correct residential, commercial, or dual CCB endorsement; a contractor performing both residential and large commercial work needs both endorsements.
What testing, cost, or renewal rule applies?
The CCB license examination fee is $60; verify current training and examination eligibility with CCB. CCB initial application and biennial renewal are $400; bond and liability-insurance amounts depend on endorsement. CCB license renewal is every two years; a lapse of more than 24 months requires training and testing again.
Does the statewide route replace local concrete permits or approvals?
No. The statewide route described here is separate from the permit, inspection, zoning, right-of-way, and project-specific contractor requirements set by Oregon's permitting authority.
Primary Sources
Regulatory requirements on this page are drawn from the official board, statute, and exam-provider materials listed below.
- Oregon CCB — license, endorsements, bonds, and fees
- Oregon Construction Contractors Board — licensing
Verified 2026-09-08 · Next scheduled review 2026-12-07
Report a correction to this guide
Corrections and presentation updates
- : Shared template updated to distinguish unspecified eligibility requirements, retain cost qualifications, and use consistent headings. Source-check dates are unchanged by presentation updates.