Skip to content
CLR

Oregon Roofing License Requirements (2026)

Gabriel Giner

By Gabriel Giner, Editor  ·  Reviewed 2026-05-30  ·  CLR Editorial Review Desk

The Oregon Construction Contractors Board (CCB) licenses every roofing contractor in Oregon under ORS Chapter 701. Roofing falls under the standard CCB Residential or Commercial Contractor license — there is no separate roofing classification, but lead-based paint and asbestos are regulated separately. CCB requires 16 hours of pre-license training, the CCB exam, a surety bond ($10,000–$80,000 depending on residential/commercial endorsement), $500,000–$2,000,000 general liability, and proof of workers compensation through SAIF or a private carrier. Oregon DEQ regulates ACM removal and Oregon Health Authority enforces the federal RRP rule for pre-1978 housing.

Federal requirement: EPA Lead RRP Rule

The federal EPA Lead RRP Rule applies in every state — including Oregon — to renovation, repair, or painting that disturbs paint in housing built before 1978. See our complete EPA RRP Lead Certification guide for who needs firm and renovator certification, what it costs, and how renewal works.

Governing Authority

This license is issued and enforced by Oregon Construction Contractors Board (CCB) pursuant to Oregon Revised Statutes Chapter 701; OAR Chapter 812 (CCB administrative rules). The CCB licenses all construction contractors in Oregon, sets pre-license training and exam standards, holds bond and insurance filings, and adjudicates contractor disputes through its Dispute Resolution Services program.

Eligibility Requirements

To qualify, an applicant must have reached age 18 and hold a valid Social Security Number. No OR residency requirement.

Good moral character

CCB reviews fraud and contractor-related offenses.

Background investigation

Disclosure on application.

Experience & Education Matrix

Eligibility here is not measured in years of experience but by no experience threshold; 16 hours of CCB pre-license training is the gating requirement, per the cited materials.

Accepted proof of experience or eligibility

  • CCB pre-license training certificate

Education substitution

Not applicable.

Examination Structure

PSI Services LLC (CCB-administered) runs the examination for this credential. Issuance is contingent on passing every part below:

  • Oregon CCB Contractor Exam — laws, business practices, contracts, employer responsibilities80 questions, 150 minutes, passing score 70%

Examination fee: $60 paid to PSI.

Retake policy: Failed exams retaken at $60; pre-license training valid two years.

Insurance & Financial Security

The CCB requires a $20,000 contractor license surety bond to be on file before the license will issue.

General liability

$500,000 per occurrence for Residential General Contractor; $1,000,000 for Residential Specialty; $2,000,000 for Commercial Level 1.

Workers' compensation

Mandatory through SAIF or a private carrier under ORS Chapter 656 for any employer with one or more employees. Sole proprietors with no employees may file a workers compensation exemption.

Additional financial requirements

No financial statement. Bond ranges: Residential General $20,000, Residential Specialty $15,000, Commercial Level 2 $20,000, Commercial Level 1 $75,000–$80,000.

Application and License Fees

Fee Amount
Application (non-refundable)$325
Examination$60
Initial license$325
Renewal (every 2 years)$325

Maintenance & Renewal

Expect to renew the Oregon CCB Residential or Commercial Contractor License — Roofing Endorsement every 2 years. Renewal currently costs $325. Biennial renewal. Lapsed bond or insurance suspends the license.

Continuing education: Continuing education required at each renewal — 8 hours for Residential, 16 hours for Commercial endorsements per CCB rule.

Downloadable Asset

2026 Oregon Roofing License Roadmap (PDF) — a printable step-by-step checklist for the application process.

Download the PDF roadmap →

Reciprocity and Endorsement

Oregon does not accept the NASCLA Accredited Examination for this classification.

Reciprocal State Accepted Exam Conditions
No formal bilateral reciprocity agreements identified.

No CCB reciprocity. Out-of-state contractors must complete training and pass the OR CCB exam.

Weighing more than one jurisdiction? The national hub compares Roofing license requirements in every state — exam, bond, fee, and experience thresholds side by side.

Step-by-Step Application Roadmap

  1. Complete 16 hours of CCB pre-license training. CCB-approved training provider.
  2. Pass the Oregon CCB exam at PSI. 70% on laws, business, contracts.
  3. Designate the Responsible Managing Individual (RMI). RMI must complete the training and pass the exam.
  4. Post the surety bond for the chosen endorsement. $15,000–$80,000 depending on residential/commercial level.
  5. Bind general liability ($500K–$2M) and workers comp. Workers comp through SAIF or private carrier under ORS 656.
  6. Submit the CCB license application + $325 fee. Endorsement-specific add-ons may apply.
  7. Register as an EPA-certified RRP firm for pre-1978 housing. Federal RRP enforced by Oregon Health Authority.
  8. Renew CCB license every two years. $325 renewal plus updated bond, insurance, and continuing education.

Common Filing Mistakes

Drawn from the board instructions and sources cited on this page, the pitfalls below are the ones most likely to slow down or sink a Oregon Roofing application.

PNW rain underlayment

Oregon coastal and Willamette Valley reroofs require self-adhering ice and water shield at eaves and valleys. Skipping the upgrade voids manufacturer warranties.

Moss treatment liability

PNW moss accelerates shingle failure. Roofers who skip moss prevention or apply zinc strips improperly face Oregon DEQ stormwater complaints.

Lead-safe RRP enforcement

Oregon Health Authority enforces federal RRP rules aggressively for pre-1978 housing. Roofing near painted soffits triggers the rule.

Asbestos in older BUR

Oregon DEQ requires AHERA notification and licensed abatement for ACM roof removal on buildings built before 1981.

OSHA fall protection

Oregon OSHA enforces fall protection at six feet with state penalties higher than federal. Aggressive inspection on residential reroof sites.

Study and Reference Materials

These are the preparation and reference materials tied to this credential — cited by the regulator or widely used by applicants. CLR earns nothing from listing them.

  • Oregon CCB Contractor Reference ManualCCB. Primary exam reference.
  • ORS Chapter 701 and OAR Chapter 812State of Oregon. Licensing law and rules.
  • Oregon Residential Specialty Code (ORSC)Oregon BCD. Roof assembly and seismic requirements.

Pre-Submission Checklist

The most critical documents or confirmations the applicant should have in hand before filing with CCB:

  • ☐  CCB 16-hour pre-license training certificate
  • ☐  PSI CCB exam pass certificate (70%+)
  • ☐  Surety bond matching endorsement ($15K–$80K)
  • ☐  General liability certificate ($500K–$2M)
  • ☐  SAIF or private workers compensation declaration page
  • ☐  CCB license application + $325
  • ☐  EPA RRP firm certification (pre-1978 housing)

Other Oregon Trade Licenses

CLR covers other Oregon trades as well — the published guides below may be more relevant:

Frequently Asked Questions

Does Oregon license roofing?

Yes. Every roofing contractor must hold an Oregon CCB Residential or Commercial Contractor license under ORS 701. There is no separate roofing classification.

What is the bond requirement?

Residential General $20,000, Residential Specialty $15,000, Commercial Level 2 $20,000, Commercial Level 1 $75,000–$80,000 under OAR 812.

Is workers comp mandatory?

Yes through SAIF or a private carrier for any employer with one or more employees. Sole proprietors may file an exemption.

What pre-license training does Oregon require?

16 hours of CCB-approved pre-license training plus the PSI exam. Continuing education required at each renewal.

When does the CCB license renew?

Every two years. $325 renewal plus continuing education and updated bond and insurance.

Primary Sources

Regulatory requirements on this page are drawn from the official board, statute, and exam-provider materials listed below.

  1. Oregon Construction Contractors Board
  2. Oregon Building Codes Division
  3. ORS Chapter 701 — Construction Contractors
  4. ORS Chapter 479 — Electrical Safety Law
  5. ORS Chapter 693 — Plumbers

Verified 2026-05-30  ·  Next scheduled review 2026-08-28